![]() Press while "Session" tree item is selected (like written in the first answer post). When you start PUTTY the next time you can select these settings again and them. Settings of previous list points plus some additional settings, you have specified, are stored now. Session settings (specified in the "Serial" tree item) are globally stored in PUTTY and may have been planned to be started from "Serial" - which does not work - or from "Session".Įnter a name of your choice into the field "Session->Saved Sessions" and press. ![]() Com-Port and Baud-Rate (see list point "1") may appear in the sesssion form. Next select the "Session" tree item and change the type of the session (maybe former "SSH" or "Telnet" to "Serial" (not in the tree this time but "Serial" in the form with the session settings). PuTTY Portable also supports Rlogin and SUPDUP network protocols. You can run the program from a USB stick, cloud folder, or local folder without having to install it into Windows. First of all consider the correct name of the COM-Port which you can find in the device manager (hardware manager) of windows and the baud rate. PuTTY Portable is a free, lightweight telnet and SSH client-server for Windows and Unix that you can use to hold a remote session. Then enter the connection data of your choice into the form on the right side. Select the "Serial" tree item in PUTTY on the left side of the little window. Voltages measured when connected an may vare from -3V to -15V but only if no data are beeing sent. ![]() Right side: 9-pin-sub-d-plug => Pin 3 on plug: TX from PC (-10V, provided by PC), pin 2 on plug: RX to PC (-7V, provided by embedded device), pin 5: ground.More details to the above solution (using "Session" instead of "Serial")
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |